AP Racing S2000 Big Brake kit USA 

This AP Racing S2000 Big Brake kit USA comprised of an AP Racing 6600 series aluminum caliper  paired to a DBA 5000 series 320x32mm 2 piece rotor that will 

1. Increase thermal capacity – these will last far longer than the stock or the C43 309mm rotors. 

2. allow for radial expansion, no more weird pad taper wear.

3. Isolate heat from the hubs and prolong wheel bearing life. 

4. Commonly available at a low cost (evo 8/9 rotor ring)

5. Caliper with high temp seals and boots will prolong service life for use in wet/dusty conditions – especially on the street, but still hold up to track heat. 

6. Anti-rattle hardware and steel wear plates will minimize noise. 

The billet 7071 aluminum bracket is designed and manufactured here in the USA.

All hardware is motorsports/aircraft grade hardware – nuts are mechanically locking jet nuts. 

This kit keeps brake bias close to stock and pairs well with stock rear brakes, the Sean Reilly Racing RX8/S197 rear brakes.

include Ferodo DS2500 pads with the kit – a great aggressive street pad that will take a fair amount of lapping/HPDE use as well. 

This kit does not include lines as many of you already have stainless brake lines – these will work with the factory style banjo.